manualshive.com logo in svg

CapKold CKPF/3, Руководство оператора

Поделиться
Скачать
CapKold CKPF/3 Скачать руководство пользователя страница 17

OM-CKPF/3          17

The CapKold CKPF/3 Mobile Pump/Fill Station comes with two alarm screens Low Temperature 

Alarm and Emergency Stop Pressed. The Low Temperature Alarm Screen will display when 

the alarm is triggered and the Emergency Stop Pressed display will only display when the 

Emergency stop button is pressed.

Low Temperature Alarm Screen

This display is where the alarm silence button is located. Once the low temp alarm is triggered 

an alarm horn will sound and the low temperature alarm screen will display. The user can then 

silence the horn. Once silenced the NAV button will appear allowing the user to navigate to 

another display.    

                                 

 

Emergency Stop Screen

This display will pop-up every time and while the emergency stop button is pressed. It will 

disappear when the emergency stop condition has been cleared.

ALARMS

Operation

The following steps are intended to give an overview of the typical steps employed in a cook/

chill kitchen when a CKPF/3 Pump/Fill Station is used to fill and seal the contents of a steam-

jacketed kettle into flexible casings, prior to safely chilling them for extended cold storage.

Preparatory Steps:

1.  Before starting the first batch in the kettle, thoroughly sanitize and rinse the interior and 

the kettle drain path through the product outlet valve, so that it is ready for connection to a 

CapKold CKPF/3 Mobile Pump/Fill Station at the end of the batch cycle.

2.  Clean and sanitize the 2-Section 3” hose that will be used to connect the CapKold CKPF/3 

Mobile Pump/Fill Station to the kettle product drain valve.

3.  Clean and sanitize the product path through the pump inlet to the product outlet valve on 

the CapKold CKPF/3 Mobile Pump/Fill Station.

COOK/CHILL OPERATION

Содержание CKPF/3

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды