CapKold CKPF/3, Руководство оператора

Страница: 16 / 32

16 OM-CKPF/3
CAL DISPLAY
Operation
The CAL Display is Password Protected. The Default Password is 1055. When the CAL button
located on the Lower Right corner on the MAINT display is pressed a keypad will be displayed
to enter the correct password. Once the correct password is entered the CAL Display is
accessed.
When the CAL display is accessed the User will be able to adjust the Pulse-per-gallon, Pulse
per liter, Temperature Bias in °F and °C and adjust the anti-repeat timer. These settings should
only be adjusted by qualified personnel.
To Set the Pulse per Gallon
Press on the numeric graphic and enter the value into the pop-up keypad. 4 pulses = 1 Gallon
so each pulse is ¼-gallon or 0.005
Enter 005 in the gallons keypad.
To Set the Pulse-per-Liter
Press on the numeric graphic and enter the value into the pop up keypad. 4 pulses = 1 Gallon
There are 3.784 liters in a gallon (3.784/4 = 0.946) so each pulse is 0.019 liters.
Enter 019 in the pop-up keypad.
To set the Temp °F or °C Bias
Press on the numeric graphic and enter the value + °F or °C into the pop-up keypad.
To set the Anti-Repeat Timer
Press on the numeric graphic and enter the value into the pop-up keypad. Units are in
hundredths of a second. This timer will not allow a second auto cycle for “X” amount of time if
the foot switch is pressed and not released. If the foot switch is pressed and not released and
the above time expires, then the pump will pump the next bag. Suggested setting of 500 is
recommended which equals 5 seconds.
NOTE
THE CAPKOLD CKPF/3 MOBILE
PUMP/FILL STATION CONTROLLER IS
FACTORY CALIBRATED BY JAC MFG INC.