CanyCom S160 Скачать руководство пользователя страница 20

Страница: 20 / 75

1 Dump Lever

. . . . . . . . . . . . . Raises or lowers bucket.

2 Turn Lever

. . . . . . . . . . . . . . Turns bucket.

3 Main Switch

. . . . . . . . . . . . . Main Switch is used to start or stop the engine.

4 Steering Levers

. . . . . . . . . . Steering Levers are used to control the traveling direction

(forward or backward) and speed of the tracks.

5 Parking Brake Pedal

. . . . . . Parking Brake Pedal is used to park the machine securely.

6 Parking Brake Lock Lever

. . Parking Brake Lock Lever is used to lock or release

Parking Brake.

7 Throttle Lever

. . . . . . . . . . . . Throttle Lever is used to control the engine speed.

8 Horn Button

. . . . . . . . . . . . . Pressing this button sounds the horn. Use this for warning

during traveling or signaling during operation.

9 Fuel Gauge

. . . . . . . . . . . . . . Displays the amount of fuel in the tank.

10 Hour Meter

. . . . . . . . . . . . . . Hour Meter displays and records the total amount of time

the machine has been in use, in the unit of 0.1 hour.

11 Battery Warning Lamp

. . . . . Lights up when Main Switch is turned to the [ | (run)]

position. If there is no problem, it goes off when the engine
is started. If a problem with battery charge system is
detected when the engine is running, it lights up.

12 Coolant Temperature

. . . . . . It lights up when the coolant temperature is beyond normal

operating range.

13 Oil Pressure Warning

. . . . Lights up when Main Switch is turned to the [ | (run)]

position. If there is no problem, it goes off when the engine
is started. If a low oil pressure is detected when the engine
is running, it lights up.

Lamp

Warning Lamp

Содержание S160












































































Результаты поиска

Содержание S160

Отзывы:

Похожие инструкции для S160

Бренды по названию

Популярные бренды

CanyCom S160, Руководство оператора

Результаты поиска

Содержание S160

Отзывы:

Похожие инструкции для S160

Бренды по названию

Популярные бренды