background image

Notice to Users and Maintenance Personnel

Thank you for purchasing this machine.
This manual provides information needed for safe and effective use of this machine to those 
who operate or maintain machine. Make sure to read and understand the manual thoroughly 
before operating this product. Also make sure to read the separate operator's manual for  
engine. 

 • This machine can be very dangerous if the safety precautions in this manual 

and  on  the  labels  attached  to  this  machine  are  not  followed.  Read  and 
understand this manual and safety labels on machine thoroughly before using 
this machine. Always follow the instructions and safety precautions, or serious 
injury or death could result.

 • This machine should only be used for its intended purpose: cutting grass and 

bushes. Any other use could be dangerous.

 • This machine may not be operated on public road or what is considered to 

be public road. It is the sole responsibility of the operator to consult the local 
regulations.

 • Do not modify this machine, or do not operate this machine with the safety 

covers removed or open. A serious accident could result.

 •  Store this manual in a safe, accessible place for easy reference.

Содержание CM185



































































































Отзывы: