29
GB
CLEANING THE SIDE BRUSHES
CLEANING THE DUST HOLDER AND FILTER
FOR MAINTENANCE, DISCONNECT THE MAINS ADAPTER AND SWITCH OFF THE ROBOT'S POWER
SWITCH.
MAINTENANCE
Clean a side brush when it gets dirty and replace it if damaged. The maximum service life of side brushes is 12 months.
Note! Before replacing side brushes, check that the L/R marking on the side brush matches the L/R marking on the
bottom of the robot vacuum cleaner.
Empty and clean the dust holder after each use (see the instructions in the pictures below):
A. Press PUSH to open the lid.
Press
F. Wash the dust holder and
primary filter under running tap
water.
G. Clean the HEPA filter with a
brush (do not wash it in water).
C. Remove the HEPA filter.
B. Lift the dust holder out.
H. Refit the primary filter and HEPA
filter in the dust holder.
D. Open the dust holder's lid.
E. Empty the dust holder.
•
Wash the HEPA filter after it has been used for approximately 15–30 days. The maximum service life of the HEPA
and primary filter is 24 months.
•
Refit the HEPA and primary filter when fully dry.
•
Replace the HEPA and primary filter as needed.
•
Do not dry the filters in direct sunlight.
NOTE!
