25
GB
DISPLAY
COMPONENTS
•
Switch ON the power switch on the bottom of the robot vacuum cleaner (the robot vacuum cleaner will beep twice and is then
in standby mode – the LED shows blue).
•
Press CLEAN (the robot vacuum cleaner will beep three times and the LED will flash blue). The robot vacuum cleaner will then
start cleaning. The LED stays blue during cleaning.
•
If there is a fault on the robot vacuum cleaner, this is indicated by the LED (see under Troubleshooting).
•
The LED flashes red when the robot vacuum cleaner's battery needs charging.
•
During charging (at the charging station or via the charging adapter), the CLEAN button shows red. When charging is com-
plete, the robot vacuum cleaner beeps five times and the LED on the CLEAN button shows blue.
•
When the time for scheduled cleaning has been set, the CLEAN button shows pink for two seconds. (To check whether the robot
vacuum cleaner is already programmed, press the PLAN button). If it is, the LED shows pink for two seconds. If it is not, the LED
does not change colour and you will hear a beep.
