28
GB
OPERATION
CLEANING MODES
1.
Automatic cleaning
In this mode, the robot vacuum cleaner cleans the room automatically and adapts
the cleaning mode to the conditions of the room.
Note!
With the robot vacuum cleaner in standby mode: Press the ON/OFF button on
the remote control (or the CLEAN button on the vacuum cleaner) to start automatic
cleaning.
2.
Spot cleaning
Press SPOT on the remote control to start spot cleaning.
•
We recommend you select spot cleaning for cleaning areas that are very
dusty/dirty.
•
With the robot vacuum cleaner in standby mode: Press SPOT (the robot vacu-
um cleaner will clean for approximately 30 seconds or until it encounters an
obstacle and stops).
•
During cleaning: Press SPOT (the robot vacuum cleaner will perform spot
cleaning for approximately 30 seconds or until it encounters an obstacle and
then returns to cleaning mode).
3.
Edge cleaning
Start the robot vacuum cleaner, press MODE on the remote control and select edge
cleaning. During edge cleaning, the robot vacuum cleaner will clean along obsta-
cles using the side brushes.
4.
S-pattern cleaning
The robot vacuum cleaner will start S-pattern cleaning automatically when it detects
that it is in an open area or an area without many obstacles. You can also press
MODE on the remote control and select S-pattern cleaning.
!
Strong sunlight should be avoided, as it can affect the robot's ability to navigate.
•
Start the robot vacuum cleaner, press MODE on the remote control and select
one of the various cleaning modes. Press ON/OFF on the remote control to
cancel the set mode.
•
Mode 1: Spiral pattern cleaning, Mode 2: Automatic cleaning, Mode 3: Edge
cleaning, Mode 4: S-pattern cleaning.
Note!
You can control the robot vacuum cleaner manually in all programs using the
direction buttons.
