Canton Smart Vento 9, Руководство по эксплуатации

Страница: 78 / 106

80
English
Note:
1
If a signal is currently being transmitted via Bluetooth
®
wireless technology, the device will not send a pairing
request to other mobile devices, even if AUT is selected�
2
If the Bluetooth
®
input is not selected, neither automatic nor manual pairing is possible�
3
To achieve pairing independent of the selected input, the BTS function must be set to AUT� Please refer to the next chapter�
Requirements for successful mating and information on the mating process can be found also on Page 82�
Requirements for the mating process:
– The Bluetooth
®
function must be activated on the mobile device�
– The mobile device must support at least Bluetooth
®
Standard 2�0�
– The mobile device must be within range of the speaker (max� 10 m)�
Mating process
– Select BT Input�
– Press the “Bluetooth
®
Pairing” button (not valid for AUT setting)�
– BTP will appear in the display (does not apply to AUT setting)�
– You now have 30 seconds to mate your mobile device (does not apply to AUT setting)�
– Start the search on your mobile device�
– Select “Vento 9 / Vento 3” as the playback device�
– The connection is established automatically after confirmation and will be displayed on the display with the message CON�
– If the connection fails, you will receive the message FAI�
– If the mobile end device requires an access code, enter 0000�
– If DIS is displayed, your mobile end device is out of range or logged out�
BTS (Bluetooth
®
Input Selection)
When this function is enabled (AUT), the speaker will automatically switch to the BT input when it detects an audio signal from
the mobile device� If this function is deactivated (MAN), the input must be selected manually� This function is deactivated (MAN)
by default with the factory settings�
Menu Settings