Canton Smart Vento 9, Руководство по эксплуатации

Страница: 70 / 106

72
English
Note: The red “ON/Standby” button on the Canton remote control has a dual function� If you press it once, ON will be displayed� This is how
it learns the switch-on function� If you quickly press the red “ON/Standby” button on the Canton remote control twice, STB will appear
in the display� That is how the standby resp� switch-off function is learned� If your TV remote control has only one button for the “ON”
and “OFF” commands, both functions, “ON” and “Standby”, will still have to be assigned this command�
DIL (Direct input learn, direct selection of signal inputs)
In addition to the “ ” and “ ” buttons, you can also select all signal inputs directly when using your TV or universal remote control, e�g� you
can assign the desired input to a specific button on your TV remote control�
1
Select the SYS menu as described in the chapter SYS (System Setup), choose the IRM function using the navigation button “ ” and “ ”
and press OK.
2
Use the navigation buttons “ ” and “ ” to select the DIL function and then press OK.
3
For example DVD for coax input will flash in the display� You can now assign a button on your TV remote control to the “Coax” input�
Note:
If you press this button on your TV remote control during normal operation, the speaker will switch directly to the DVD input
4
Press the desired button on your TV remote control
If the infrared (IR) code has been successfully transmitted to the speaker, the display will briefly initially show OK and then it will show the
next input, e�g� TV� If the code could not be transmitted, or if you do not press a button on your remote control within 10 seconds, the
display will briefly show FAI, which indicates that no code has actually been transmitted� After that, the display will continue to flash DVD
and you can continue to transmit the code for the coaxial input�
5
If you do not want to assign a button to the Coax input, briefly press the “ ” button to access the next input, manually�
6
To assign a button on your TV remote control to one of the other inputs, repeat the steps described in steps 4 – 5�
Note: Due to the large number of infrared codes, it cannot be guaranteed that every remote control can be learned by the speaker�
Signals from radio frequency (RF) remote controls cannot be learned, generally�
Menu Settings