30
31
English
English
Setting up the
remote control
the remote control comes with a battery already installed.
Simply remove the protective film to activate. When replacing
the battery ensure that it is correctly inserted according to
the polarity markings (+/–). Only use the battery specified
for this system (CR 2032).
Note
the battery provided is intended for test use and may there-
fore have a shorter lifespan.
Connections DM
1
Power inlet
2
Output – ext. subwoofer
3
input – tV (optical)
4
input – DVD (coaxial)
5
input – AuX (analogue)
6
Jack service (Canton)
7
input – SuB iN (wired)
8
input selector switch
(wireless/wired)
Connection Terminal
Soundbar DM 900
SUB OUT
Service
Subwoofer DM 900
SUB IN
[WiReD]
100-120V~ or 200-240V~ 50/60Hz
MAX. 200W STANDBY <0.5W
SUB IN - MODE
WIRED
[POWeR AutO]
WIRED
[POWeR ON]
WIRELESS
[POWeR AutO]
SeRViCe
7
1
6
8
Remote control
CR 2032
DM Soundbar
open
closed
Unpacking
unpack the box carefully and check that all the following
parts are present:
• 1x Canton Soundbar DM 900
• 1x Wireless Subwoofer
• 1x Remote control inc. battery
• 2x Mains cable
• 1x Optical digital audio cable
• 1x Stereo RCA-cable
• 1x Digital RCA-cable
Breaking in
Maximum sound quality requires a breaking-in
time of 15 – 20 operating hours.
• During this time operate the loudspeaker at
normal volume
• Avoid high noise levels
• Listen to a variety of music
Installation
in case of wall-mounting the Soundbar should be positioned
below the flat-screen tV. in connection with a free-standing
flat-screen tV it should be positioned in front of the flat-screen
tV. the subwoofer can be set up anywhere in the room.
However, the distance between the Soundbar and the sub -
woofer should not exceed 10 m.
