CANTERBURY Z2214-29, Руководство пользователя

Страница: 4 / 16

Installation Instructions Model : Z2214
Further information Phone (03) 9761 4603 sales@sinkandtap.com.au
❷
❸

Adjust the Tap Side body to the correct height
and then tighten using a 32mm spanner or
adjustable smooth jawed shifter.

Note: Make sure that the locking nuts are fully
tightened, otherwise the side body may turn
while turning the On Off lever.

Feed the cover plate 6 , onto the tap side body,
until it is flush with the counter top surface.

Thread the retaining flange and handle 7, onto
the cartridge, securing it firmly by hand only.
See the “Removing and replacing a handle”, on
page “12” for additional details.
4
❶

Thread the bottom brass lock nut 1 , followed by the
bottom rubber washer 2 , onto the Side body 3 , thread
section.

Repeat for the opposite side.

Insert the Side body 3 , through the tap hole cut outs in
the counter top.

Feed the top rubber washer 4 over the thread section
followed by the top brass lock nut 5 .
Continue…….