CANTERBURY Z2214-29, Руководство пользователя

Страница: 10 / 16

⓬

Install the tap spout flexi hose 38 , to the
Diverter output.

Place the rubber washer 39 , between the
female hose thread connecter, and the
Diverter output.
Installation Instructions Model : Z2214
Further information Phone (03) 9761 4603 sales@sinkandtap.com.au
10
Before use

Turn on the Hot and Cold supplies to the tap.

Maximum temperature for Hot water supply to the tapware is 62 °C.

Minimum recommended pressure is 100 kPa — Maximum recommended pressure is 500 kPa.

Check the installation carefully for leaks.

If further building work is to be carried out in the vicinity of the tapware, it should be covered to
prevent paint, adhesive, etc. from damaging the surface.