Cantek PW120E, Руководство по эксплуатации и запасным частям

Страница: 22 / 36

- 22 -
CORNER TABLE
The corner table can be adjusted to accommodate a wide range of workpieces. To adjust the side table:
1.
Loosen the lock handle shown in
Figure 17
.
2.
Move the corner table to the desired height.
3.
Tighten the lock handle loosened in Step 1 after the table position is at the desired height.
CORNER TABLE ANGLE
The corner table angle can be adjusted tilting angle according to different workpiece angle adjust as follows:
1.
Loosen the lock handle underneath the side table shown in
Figure 18
.
2.
Swivel the table to the desired position.
3.
While holding the side table in the desired position, tighten the lock handle loosened in Step 1 .
Figure 17. Lock handle for side table height
Figure 18. Lock handle for side table angle