Cantek PW120E, Руководство по эксплуатации и запасным частям

Страница: 17 / 36

- 17 -
5.
Take out the old sanding belt and replace it with a new one.
6.
Make sure the directional arrow on the inside of the sanding belt is pointing in the same direction as the
directional arrow on the machine; as shown in
Figure 10
.
7.
Shift the sanding belt tension lever to the right to tighten the sanding belt.
8.
Make the sanding belt adjustment. (see next section)
9.
Close the guard.
Figure 10. Sanding belt direction