Cantek JEN-60, Руководство по эксплуатации и запасным частям, Страница: 8 / 37

7 DEC. 2019
Step 6
1. A D J U S T M E N T F O R T H E C U T T I N G H E I G H T :
We have preset the drawer notch height to your specification, but you
may need to do the micro-fine tune adjustment as required. The notch
depth adjustment is done at the motor plate. Loosen the two Hex. Nuts
(part no: JEN60-03A-1) to raise or lower the cutter. Please make sure to
retighten after any adjusting.
2 . A D J U S T M E N T F O R T H E D R I L L H E I G H T :
The drill height is adjusted by loosening the (2) cap screws (part no:
JEN-60-04A-05 and 04) in front of the machine. Please retighten after
adjusting. The drill speed can be adjusted by turn on the air capacity on
the top knob of air supply unit (part no: JEN-60-07A-04)