Cantek JEN-60, Руководство по эксплуатации и запасным частям, Страница: 14 / 37

13 DEC. 2019
DRILL HEIGHT GAUGE
The Drill Height Gauge has three holes in it to accommodate a drill height of
13/16” , 15/16” or 1-1/16”. (Drawing number
“E”)
1) The 13/16” hole is set for 3/8” Cutter Height.
2) The 15/16” hole is set for 1/2” Cutter Height.
3) The 1-1/16” hole is set for 5/8” Cutter Height.
The machine comes standard with a 2-1/4” cutter (57mm) with 1/2” for the
cutter height(12.7mm). Special cutters can be custom ordered. Multiple Pass
Models are also available (for wider cuts, you’ll make multiple passes).
D Cutting Height
3/8"
(9.53mm)
1/2"
(12.7mm)
5/8"
(15.88mm)
E
From button of drawer
to center of drill
13/16"
(20.64mm)
15/16"
(23.81mm)
1-1/16"
(27mm)
A. Distance of Inside box to center of drill hole
B. Cut width (depend on your order cutter size,
32/35/38/45/51/57mm)
C. Drill diameter of depth
D. Cutter height
E. From button of drawer to center of drill (need to
match with D size and with Drill height gauge)
F. Height of hole from top of notch
G. Drawer side thickness