Cantek JEN-60, Руководство по эксплуатации и запасным частям, Страница: 10 / 37

9 DEC. 2019
ROUTINE MAINTENANCE
We recommend that the motor shaft bearing be greased every 200 hours
using. It will help to keep running smoothly and longer life.
Check oil level in the Hydraulic Reservoir – if it needs to be added to or
replaced, we suggest Hydraulic Oil AW ISO 32.
Please turn off all the power and start to check the reversible knife/Inserts
cutter for wear and service accordingly. The cutter should be removed
when rotating or replacing the carbide reversible knife. (Each carbide
reversible knife has four cutting edges that can be rotated when dull.)
Loosen and remove the Allen head cap screw to lift out the cutter. When
reinstalling the cutter, you must turn it clockwise against the locating stops.
When firm, retighten the Allen head cap screw.
Extra reversible knife/ inserts can be bought in packages of 10:
#part no: JEN-60-02A-28 ( attached square shaped, wide: 57mm ) –
(Cutter uses 70 inserts)
JEN60-410-32 /cutter( wide:32mm) w/reversible knife x 50 pcs
JEN60-410-35 /cutter (wide:35mm) w/reversible knife x 50 pcs
JEN60-410-38 /cutter( wide:38mm) w/reversible knife x 50 pcs
JEN60-410-45 /cutter( wide:45mm) w/reversible knife x 60 pcs
JEN60-410-51 /cutter( wide:51mm) w/reversible knife x 60 pcs
JEN60-410-57 /cutter ( wide:57mm) w/reversible knife x 70 pcs