Cantek JEN-60, Руководство по эксплуатации и запасным частям, Страница: 13 / 37

12 DEC. 2019
CHANG DRAWING NOTCHER SIZE
USING THE SAMPLE TOOL PIECE
A. Remove Belt Cover.
B. Inspect Belt for wear and damage.
C. Adjust Motor Mount if Belt needs tightening.
D. Check and adjust cutting height and drill height, using caliper to check and
adjust off sample tool piece.
E. Check and adjust cutting tool and drill side to side, using caliper to check
and adjust off sample tool piece.
F. Check and adjust drill cutting depth, using caliper to check and adjust off
sample tool piece.
This sample tool size will help you to get the size of below drawing
“E”
Please see the reference list:
D Cutting Height
3/8"
(9.53mm)
1/2"
(12.7mm)
5/8"
(15.88mm)
E
From button of drawer
to center of drill
13/16"
(20.64mm)
15/16"
(23.81mm)
1-1/16"
(27mm)