Cantek JEN-60, Руководство по эксплуатации и запасным частям, Страница: 5 / 37

4 DEC. 2019
SETUP
This machine is designed to notch your cabinet drawer boxes for undermount
hardware. It is specifically designed for Blum
®
, but it also works with many
other brands. This machine can cut the recess and drill the hole in the drawer
box all at one time. You simply set the drawer box over the cutter and against a
side fence. Push the drawer box back against the back fence activating the
machine. Step on a foot control which moves the cutter up into the bottom of
the drawer box at the same time as the drill moves inward to drill the holes in
the drawer’s back. You will be able to do all of this in approximately 10 seconds!
Step 1
: After uncrating your machine, you may either install your unit on
the correct location , please measure your space first or bolt the machine
to the floor in a permanent spot.
Table height: 32 Inch
Table size: 22 x 48 Inch
Footprint: 48”W x 31” D x 40” H