SmartLock
®
Controller
Page 9 of 26
Installation Manual
Nov 2018 • Rev. 3.2
LED INDICATORS
1.
Relay LEDs turn RED when the corresponding relay is ON or
ACTIVATED.
2.
The Wiegand data LED is normally ON and briefly flickers when valid
Wiegand data is received from the reader. If Wiegand data is not valid
or not supported, this LED will stay OFF until the next valid card is
read.
3.
The communication LED will flicker GREEN while communicating
with SmartLock software.
MOUNTING
Up to two SmartLock controllers can be mounted in the SmartLock
enclosure along with a Cansec 12 VDC power supply and a backup battery.
