Canon XJ22 7.3B Series, Руководство оператора

Страница: 210 / 326

E4-58
4. Menu screen – Info
1.
ࠉ
Push the key, push the key, and push the key.
The display is switched to the Info screen.
2.
ࠉ
Move the key three times.
An underline appears below [CamSeri].
3. ࠉ Move the key or key.
Move the left or right key to select {ON} or {OFF}.
A 1
A 2 V
R
[ ] 1
VTR
FRM1 RET
EXT
I G : 5 0
Menu
[ IND ]
1
Info
OFF
Encoder: OFF
ON
Info
CamSeri:
Info
CamSeri:
Encoder:
ON
CamSeri:
Encoder:
Adjust
Adjust
Display: IND
1
1
Set
(D)
OFF ON
or
Set
Menu
Info
1 x3
As an interface between the camera and the lens, two ways of control, the serial communication control and the analog
control, are used. Use this setting to switch between the automatic identification setting and the analog control setting of
the interface. The default setting is “ON: enabled” and with this setting, the lens automatically identifies the control setting
as whether the serial communication control or the analog control. Set to “OFF: disabled” for selecting the analog control
as an interface between the lens and the camera.
Selection item
Function
Output enabled Output disabled
Setting the camera serial communication to On or OFF
Top initial screen
Info screen