Canon XJ22 7.3B Series, Руководство оператора

Страница: 186 / 326

E4-34
4. Menu screen – Preset
※
(NOTE): The same setting value applies to both Frame1 and Frame2.
IMPORTANT: Prior to operation, select the user for whom the setting will be made.
(For details on how to select the user, refer to page E3-4 or E4-4.)
Setting the zoom speed in the preset mode
The zoom speed from any position up to the memory position can be set. There are two ways to change the speed
setting: one involves using the Memo button (refer to the Lens Operation Manual), and the other is through display op-
erations. Either way can be used, but the setting established last takes precedence.
1. Push the key, push the
Set
key, and push the key twice.
The display is switched to the Preset screen.
VTR
A 1
FRM1
A 2
V
RET
R
[ ] 1
EXT
I G : 5 0
Menu
[ IND ]
Frame2:
Preset
PRE
ZSpeed:
ZMovement
800
Frame2:
Preset
PRE
ZSpeed:
ZMovement
500
Frame1:
Preset
PRE
Frame2: PRE
ZSpeed: 800
Top initial screen
Preset screen
2. Push the key three times.
An underline appears below [ZSpeed].
The last setting or default value is highlighted.
3. Push the key or key.
Push the left or right key until the number to be
changed to appears.
(D)
x2 x3 or
001 to 800
Selection item
Function
(D): Default value
Minimum speed Maximum speed
Preset
Set
Menu
Preset – Setting the zoom speed in the preset mode