Canon XJ22 7.3B Series, Руководство оператора

Страница: 197 / 326

E4-45
4. Menu screen – Zoom
Zoom – Setting F-Hold to ON or OFF
Setting F-Hold to ON or OFF
F-Hold can be set to ON or OFF.
The same F-Hold setting can be used for all the users regardless of the user who is indicated on the display. For this
reason, there is no need to select the user before performing the setting. As an exception to the general rule, any
change made in the setting is reflected for user 0 as well.
A 1
A 2
V
[ ] 1
VTR
FRM1 RET
R
EXT
I G : 5 0
Menu
[ IND ]
Tracking
F-Hold:
Movement
Zoom
[ ]
OFF
OFF OFF
Tracking
F-Hold:
Movement
Zoom
[ ]
OFF
ON ON
Tracking:
F-Hold:
OFF
OFF
Movement
Zoom
[ ]
(D)
OFF ON
Menu
Set x4 x2 or Zoom
[ ]
※
(NOTE): The F-Hold setting is not initialized even when the steps described in “Initializing” on page E4-6 are
taken.
The F-Hold setting is not stored in the memory when the power is turned off. When the power is
turned on again, {OFF} is established as the default setting.
When Iris is set as Auto, F-Hold can not be set {ON}.
1. Push the key, push the
Set
key and push the key four times.
The display is switched to the Zoom screen.
2. Push the key twice.
An underline appears below [F-Hold].
The function set last or default function is
highlighted.
3. Push the key or key.
Push the left or right key to set the function to {ON}
or {OFF}.
Selection item
Function
(D): Default value
F-Hold disabled F-Hold enabled
Top initial screen
Zoom screen