Canon XJ22 7.3B Series, Руководство оператора

Страница: 165 / 326

E4-13
4. Menu screen – User
User – Copying data between lenses
Set
Set Set
User
1
Set
Set
x2
Menu x5
Continued from previous page
y/n
ToOtherLens
User
ToAllUser
Copy:
1
y/n
Now Data Copy
Please Wait...
User
Copy
ToOtherLens
1
ToOtherLens
User
ToAllUser
Copy:
1
y/ n
ToOtherLens
User
ToAllUser
Copy:
1
y /n
ToOtherLens
User
UserCopy :
AllCopy :
1
y/n
y/n
ToOtherLens
User
UserCopy :
AllCopy :
1
y /n
Access: Unlock
The display is switched to the Screen B.
Screen B
Screen A
7. Push the key twice.
An underline appears below [AllCopy], and
either {y} (YES) or {n} (NO) can now been
selected.
8. Push the
Set
key.
The display is switched to the AllCopy screen.
11. Push the
Set
key.
＊
1
＊
2
The screen now shows the “Now Data Copy”
message for a few moments before returning to
Screen A.
This completes the copying of the settings
between the lenses.
※
(NOTE): If the settings were not copied successfully, an error message will
appear. For details on what remedial action to take, refer to “(3)
When an error display has appeared” on page E4-14.
＊
1: If the Set key is pushed
here, copying is actually
commenced. Bear in mind
that once copying starts, it
will not be possible to re-
store the data in the copy
destination lens to the
original data.
＊
2: Refrain from operating the
operation switch or push-
ing the DISPLAY switch on
either the copy source lens
or copy destination lens
while the settings are be-
ing copied. Otherwise, the
copying operation may not
be conducted properly.
9. Push the key.
An underline appears below [Copy], and either
{y} (YES) or {n} (NO) can now been selected.
10. Push the key, and select {y}.
AllCopy screen