Canon WFT-E7 Ver.2, Инструкция по эксплуатации

Страница: 71 / 122

71
Shoot with the master camera linked to slave cameras as follows.
1
Set up the master camera.
Configure the settings on the master camera
following steps 1-3 on the preceding page, and
then select [
Master ].
2
Select [Auto connect].
For [ Manual connect ] instructions, see page 75.
3
Set up the slave cameras.
On the slave cameras, select [ OK ].
4
Check the number of slave cameras.
X On the master camera LCD monitor, the number of
slave cameras detected is displayed.
5
Establish the connection.
On the master camera and all slave cameras,
select [
OK ].
X A screen confirming the connection of the camera
is displayed.
Settings information is stored on the cameras. It is
not stored on the transmitters.
Basic Linked Shooting