Canon VK-16 v2.1, Руководство администратора

Страница: 266 / 288

9-24
Messages List
Organize
Layouts &
Layout
Sequences
dialog
Unable to change layout name. The name
'<layout name>' already exists.
An attempt was made to change the name
of a layout or layout sequence to a name
that is already being used.
Unable to change layout folder name. The
name '<folder name>' already exists.
An attempt was made to change the name
of a folder to a name that is already being
used.
This will replace an existing layout of the
same name. Are you sure?
A layout or layout sequence with the same
name exists in the folder to which the layout
or layout sequence is moved or copied.
The layout or the folder of the same name
has already been registered.
A folder with the same name as the folder
to which the layout or layout sequence is
moved or copied exists. Or, a layout or
layout sequence with the same name exists
in the folder to which the folder is moved or
copied.
You cannot delete
<layout sequence name>
because it is the current layout sequence.
An attempt was made to delete the current
layout sequence.
Sensor Event
Settings dialog
The recording frame rate for sensor
<sensor name> must be between 0.1fps
and 30fps.
An invalid recording frame rate was
entered.
Sensor
Settings dialog
The pre-event time for sensor <sensor
name> must be no greater than 30.
[ OK ] was pressed after configuring a value
exceeding 30 seconds for the pre-event
time value.
Viewer
Settings
window
Do you want to save your Viewer Settings
changes? An attempt was made to close the Viewing
Screen without saving the changes.
Messages Cause
VK-64_SysManual_Ev21.book 24 ページ ２００９年３月２日 月曜日 午後１時３分
CO
PY