Canon VK-16 v2.1, Руководство администратора

Страница: 114 / 288

4-34
Set Normal Schedule
Configure Motion Detection Recording and Sensor Recording Settings
1. Check the [On motion detection] box if you want recording activated when motion is detected during this time
period.
2. Check the [On sensor event] box if you want recording activated from a sensor event during this time period.
3. Click [Settings] to change the details.
See P. 4-45 and P. 4-53 for details of Motion Detection and Sensor Event recordings.
Configure Audio Recording
If you want to record audio when video recording mode is selected, select the [ Audio recording ] checkbox.
Audio-only recording is not available, so Audio recording should be set as an addition to video recording.
Note
z
Audio recording is available on camera servers that support audio transmission function (VB-C500D,
VB-C60, VB-C300, VB-C50i, VB-C50iR, VB-C50FSi). On camera servers that do not support the function,
the Audio recording checkbox is disabled.
z
Audio recording is enabled when video recording mode is on. It is not possible to setup schedules that
only record audio without recording video.
z
When the resolution ( P. 4-38) is set to JPEG, recorded video and the audio are synchronized. However,
the synchronization is not guaranteed.
z
Live video and audio are not synchronized.
z
Audio is recorded at 8 KB/s. The communication volume is 64 kbps.
z
After [ Audio recording ] is enabled, related indications are changed to show that, such as [
Sensor (Audio) ], in the [ Configuration and Preferences ] screen > [ Camera Summery ] tab ( P. 4-8), and
the [ Configuration and Preferences ] screen > the [ Recording Schedules ] tab (P. 4-27).
z
The timeline on the [ Viewer ] screen ( P. 5-48) does not show whether audio recording is enabled or not.
z
[ Audio recording ] via a proxy server is not supported.
VK-64_SysManual_Ev21.book 34 ページ ２００９年３月２日 月曜日 午後１時３分
CO
PY