Canon VK-16 v2.1, Руководство администратора

Страница: 132 / 288

4-52
Set Motion Detection Recording
Step 6: Set frame rate and pre and post event recording duration
1. [Max. Frame Rate] - select a maximum frame rate for recorded video from the drop-down menu. Choose
from 0.1 frames per second to 30 frames per second (5 is the default).
2. [Record for] [sec. before event] - enter a number of seconds for the amount of recording time before the
event occurs (up to 30 seconds).
3. [Record for] [sec. after event] - enter a number of seconds for the amount of recording time after the event
occurs (up to 999 seconds).
Step 7: Set the [External Outputs]
Click the drop-down menu for the target external device and set [ On ] or [ Not specified ].
Click [ OK ] to save the new settings and close the dialog.
Click [ Cancel ] to discard the new settings.
Note
z
If [ Continuous ] is also selected, Record for before event is not available.
z
If Record for before event is set, it will take approximately 10 seconds after event occurrence until its
display in the viewer.
z
If the resolution is set to MPEG-4, the frame rate set in the VB-C500D or VB-C60 becomes enabled.
Note
Available external outputs depend on the Camera Server.
Note
Even with 0 seconds set to [ Recorded for __ sec. before event ] and [ Recorded for __ sec. after event ] fields,
video is still recorded while motion is being detected.
Tip
See Chapter 6 for optimizing the Motion Detection operation.
VK-64_SysManual_Ev21.book 52 ページ ２００９年３月２日 月曜日 午後１時３分
CO
PY