Canon Vizcam 1000, Руководство пользователя

Страница: 176 / 278

10-10
Special Sending Procedures Chapter 10
Using One-touch or Coded Relay Sending
Before starting, confirm the following:
❏
Your fax number is registered with the relay fax.
❏
The fax numbers of the receiving fax machines (final
destinations) are registered with the relay fax.
❏
Your fax number is registered in your MultiPASS 1000.
❏
You have registered the relay procedure for one-touch or
coded speed dialing as described above.
Follow these steps:
1. Place the document face down in the Automatic Document
Feeder (ADF).
2. To use memory sending or to send to more than one relay fax,
press
FUNCTION
and then press
MEMORY TRANSMISSION
.
Otherwise, skip this step.
3. Press the one-touch speed dialing button or press
CODED
DIAL/DIRECTORY
and the two-digit code (on the numeric
keypad) that you registered for relay sending.
❏
If you are using direct sending, you can send to only one
relay fax.
❏
If you are using memory sending, you can send to up to 97
relay fax machines. See Sending to More Than One Location
on page 10-1 for details.
• First make sure that each speed dialing number is
registered for relay sending.
• You can also use one-touch or coded speed dialing
buttons registered for group dialing as long as each
number in the group is registered for relay sending.
If you are using memory sending, the MultiPASS 1000 scans the
document into memory. See Sending Large Documents on page 5-10
for details.
The MultiPASS 1000 sends the document to the relay fax
machine(s). See Transmitting the Document on page 5-11 for details.