Canon VIXIA HF G40 Скачать руководство пользователя страница 104

Страница: 104 / 187

Connecting to an External Monitor

104

Using the HDMI OUT Terminal

The HDMI

OUT terminal also offers a digital connection and outputs both a video and audio signal.

If you selected [

Automatic], the output signal will automatically switch to HD or SD depending on

the capability of the external monitor. In

mode, the HDMI OUT terminal outputs two-channel

linear PCM audio with a sampling frequency of 48 kHz.

1 Open the [HDMI Output] screen.

[FUNC.]

[MENU]

[HDMI Output]

• Touching [FUNC.] is necessary only when performing the procedure in

mode.

2 Touch the desired option and then touch [

NOTES

• The HDMI OUT terminal on the camcorder is for output only. Do not connect it to an HDMI output

terminal on an external device, as this may damage the camcorder.

• There will be no video output from the AV OUT terminal while an external monitor is connected to

the HDMI OUT terminal.

• Correct operation cannot be guaranteed when connecting the camcorder to DVI monitors.
• Video may not be output correctly depending on the monitor. In such case, use another terminal.
• If you selected an option other than [

Automatic] and the connected monitor is not compatible

with the signal output from the camcorder, then HDMI output will stop.

• By default, onscreen displays will be embedded in the output video signal. You can change this

using the

[Output Onscreen Displays] setting.

Using the AV OUT Terminal

The AV OUT terminal outputs a down-converted analog video signal and audio signal for connection
to monitors with a composite audio/video input.

NOTES

• When you play back a scene on a monitor with a 4:3 aspect ratio, the monitor will switch

automatically to widescreen mode if it is compatible with the Video ID-1 system.

• If you are connecting the camcorder to a standard definition monitor without widescreen mode,

make sure to change the

[TV Type] setting.

Содержание VIXIA HF G40




























































































































































































Результаты поиска

Содержание VIXIA HF G40

Отзывы:

Бренды по названию

Популярные бренды

Canon VIXIA HF G40, Инструкция по эксплуатации

Результаты поиска

Содержание VIXIA HF G40

Отзывы:

Бренды по названию

Популярные бренды