Communications
The
RS-232
communication speed can be set to
4800, 9600 or 14400
bps
(bits per second). To adjust the speed, select the arrow next to the
default value (
9600
) and choose a different speed from the drop menu
and choose ‘
OK
’. The bps dip switch setting* of the
VC-C3
should be
the same as what is set in the software. Consult your computers’
manual for the speeds your computer supports.
*Dip switch setting – Below is the table for setting the communication
speed on the
VC-C3
Camera. Make sure the
VC-C3
is powered OFF
and then move the switches to the desired position. The Diagram
shows the default position of all switches.
If the
DIP
switch setting on the
CCU
and the setting you chose in the
Communications Baud rate window are different you will get the
following error:
9
