WIRELESS CONTROLLER
An infra red wireless controller was included in the
VC-C3
camera box
when you bought the camera. The wireless controller allows you to
control the camera without using a computer. At times you might want
to disable the wireless controller signal and only control the camera via
the
RS-232
connection on the
VC-C3
.
When the
VC-C3
software program is initially started the wireless
remote is always active. To disable the use of the wireless controller
select the ‘System Menu’ button in the upper left corner of the applica-
tion window and select ‘Program Options’. Uncheck the ‘Enable
IR
remote control’ and choose ‘
OK
’. This will disable the
VC-C3
camera
from executing commands that are sent from the wireless controller. See
illustration on page 7.
VC-C3 Wireless Controller (WL-V2)
18
