SETTING PRESETS
Six preset locations can be set using the
VC-C3
Control Software. A
preset location consists of pan, tilt, zoom and brightness position
information.
To set a preset location:
1. Adjust pan and tilt position of camera.
2. Zoom in or out as needed.
3. Select the desired brightness setting.
4. Press the Preset button once.
5. Press one of the preset buttons (
1 – 6
) which will be used for the
camera’s current position.
6. The desired preset will now be programmed.
Repeat steps
1 – 6
to set the remaining preset positions.
A preset position can be changed by repositioning the camera and
assigning the new position to a preset
number. Please note that this process will
overwrite the previous existing preset
position information and a new preset will
be recorded in its place.
NOTE
: All preset positions are SAVED
even though the camera may have been
powered off.
Preset Buttons
13
