Canon VB-730F Mk II, Руководство по эксплуатации

Страница: 174 / 242

174
Note
A ratio of up to 30% can be set in [Object Size (%)] for passing detection.
Detection Status for Passing Detection
All moving objects detected are displayed with white profile lines.
When the [Decision Point] of a moving object that meets the [Object Size (%)] setting crosses a detection line in the
direction specified in [Passing Direction], the profile line changes to the same color as the detection line, and the
status becomes “detected”.
Notification of a passing detection event occurs only when the decision line is crossed. Take care in setting the
operation to be performed when an event occurs.

How to Configure Intrusion Detection
Set the area for which you want to detect intrusions.
The decision point is indicated by a cross on the detection frame of the moving object.
Important
Perform a detection test after configuring passing detection to make sure the detection frame of a moving object continues to be
displayed.
Object Size Indicator
1 In the video display area, draw the area in which you would like to detect intruding objects (P. 166).
2
Configure [Duration (Sec)] for the time required for an object to enter a detection area, and be detected as an
intrusion.
3
In [Decision Point], select the point of a moving object that will be used for triggering intrusion detection when the
moving object enters a detection area.