Canon VB-730F Mk II, Руководство по эксплуатации

Страница: 115 / 242

Setting Page
5
115
Configuring View Restrictions
Set a restrict view area and click [Apply] to restrict the capture range of the Camera Viewer.
Note
To delete view restriction settings, select [Disable], and click [Apply].
Operate the camera angle using the frame on the video display area or the panorama screen/full-view screen to
get the positioning value, and specify the restrict view area.
[Upper Limit]/[Lower Limit]/[Left Limit]/[Right Limit]
Operate the camera angle to the upper limit, lower limit, left limit, and right limit to set in the video display area.
Click [Get value] in each position to reflect the values to the pan/tilt preview frame.
Click [Preview] in [Upper Limit]/[Lower Limit]/[Left Limit]/[Right Limit] to move the preview frame to the upper
limit, lower limit, left limit, and right limit of the current pan/tilt preview frame, respectively, and display it in the
video display area.
[Telephoto]/[Wide-angle]
Operate the camera angle to the wide-angle/telephoto limit to set, using the frame on the video display area or
the panorama screen.
Click [Get value] in each position to reflect the values to the wide-angle preview frame/telephoto preview frame.
Click [Preview] in [Telephoto]/[Wide-angle] to move the preview frame to the telephoto/wide-angle limit of the
current wide-angle preview frame/telephoto preview frame and display it in the video display area.
You can also set the telephoto/wide-angle limit range by directly moving the operation knob on the zoom slider up
and down. This also moves each preview frame to the telephoto/wide-angle limit of the current wide-angle
preview frame/telephoto preview frame and displays it in the video display area.
If you dragged the telephoto knob to the upper limit and the wide-angle knob to the lower limit, the view restriction
is disabled for each edge (there is no restriction).
Important
• If you have changed how the camera is installed, reconfigure the view restriction settings.
• Check view restrictions again if you change the [Basic] > [Video] > [All Videos] > [Video Size Set] settings on the Setting Page.
• When [Camera] > [Camera] > [Camera Control] > [Digital Zoom] or [Image Stabilizer] ( ) is changed on the Setting Page, check
the view restriction settings again.
HM4x
1
Select [Enable] in [View Restrictions].
2
Set the restrict view area using the frame on the video display area or the panorama screen/full-view screen.