Canon VB-730F Mk II Скачать руководство пользователя страница 142

Страница: 142 / 242

142

Set the video and audio transmission using RTP.

RTP Server

Enable RTP, and set the RTSP authentication method and port number.

[RTP]

Select this to enable or disable RTP.

[RTSP Authentication Method]

Select an authentication method for RTSP. Since the RTSP authentication method is configured independently of the HTTP

authentication method, you need to configure each authentication method.

[RTSP Port]

Enter the RTSP port number.

Normally use [554] (factory default setting).

Audio Multicast

Set multicast for audio transmission.

[Multicast Address]

Enter the multicast address for audio transmission as follows.

IPv4: Range from 224.0.0.0 to 239.255.255.255.

IPv6: Address starting with ff00::/8

Set IPv4 to [0.0.0.0] and IPv6 to [::0 (::)] to disable multicast.

[Multicast Port]

Enter the multicast port number for audio transmission.

If set to [0], multicast is disabled.

[Multicast TTL]

Enter the effective range for multicast transmission.

If set to [0], multicast is disabled.

The TTL (Time To Live), representing the effective range for multicast transmission, is decremented each time the signal

passes through a router. When the value reaches 0, the signal can no longer pass through the router and be transmitted.

For example, if TTL is set to [1], multicast transmission is confined to the local segment only and cannot pass through the

router to be transmitted.

[Server] > [RTP Server]
RTP Settings

The following settings can be configured here.

• RTP Server

• Audio Multicast

• RTP Stream 1 to 5

Содержание VB-730F Mk II



















































































































































































































































Результаты поиска

Содержание VB-730F Mk II

Отзывы:

Похожие инструкции для VB-730F Mk II

Бренды по названию

Популярные бренды

Canon VB-730F Mk II, Руководство по эксплуатации

Результаты поиска

Содержание VB-730F Mk II

Отзывы:

Похожие инструкции для VB-730F Mk II

Бренды по названию

Популярные бренды