manualshive.com logo in svg

Canon VarioPrint MICR i Series, Руководство по эксплуатации

Поделиться
Скачать
Canon VarioPrint MICR i Series Скачать руководство пользователя страница 26

Main hardware parts

The VarioPrint i-series MICR is a modular printer. The modules in the front position are mainly
used for the job production. The modules in the rear position give access to the consumables,
service units, and control units.

The VarioPrint i-series MICR can have up to three paper input modules and one or two high
capacity stackers. More equipment can be connected to the printer for finishing the output.

There are two hardware models of the VarioPrint i-series MICR. The first model has a registration
output module with an output tray and an ink cabinet with drawers. The other model has a
registration output module without an output tray and a cabinet without drawers. Most options
and features are applicable to both models. When needed this operation guide describes
instructions for both models.

Front view

Below is an overview of the main parts visible from the control panel of the printer.

5

7

10

9

4

3

6

17

12

11

8

13

14

16

15

2

1

[1] Front view of the printer

 

Description of main hardware parts

1

The operator desk and the control panel are the local communication point for the opera-
tor.

2

PRISMAsync Print Server steers the performance, workflow, and print quality of the printer.

3

Up to three paper modules hold and feed the media. The paper modules keep the loaded
media in optimal condition.

4

The paper path module positions the media correctly on the paper path and turns the
sheets before the second sides are printed.

5

The registration input module positions the media correctly on the paper path and purges
sheets with imperfections.

6

The sentry detects sheets with imperfections, such as waves, bursts, and folded corners.

7

The sentry tray collects sheets with imperfections detected by the sentry. These sheets do
not enter the print module.

4

Main hardware parts

26

Chapter 3 - Explore the printer

VarioPrint i-series MICR

Содержание VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды