manualshive.com logo in svg

Canon VarioPrint MICR i Series, Руководство по эксплуатации

Поделиться
Скачать
Canon VarioPrint MICR i Series Скачать руководство пользователя страница 118

Work with the schedule in transaction printing mode

The schedule in transaction printing mode, shows less job information compared with the
schedule in document printing mode. The schedule does not show colored media bars or
production times for the transaction print jobs.

However, the status color indicates the printer status and informs when you must prepare or
perform an action. The status bar on the dashboard, the status LED on the control panel, and the
operator attention light illuminate the same color. You set the warning time according to your
wishes.

It can also be helpful to use the control panels of the paper module and the high capacity stacker.

[135] The schedule in the transaction printing mode

The screen with the schedule provides the following information in transaction printing mode:
1. The 

timeline

 shows the current job or data stream.

2. The 

required media

 pane shows the media for the current data stream. A data stream can

have job separators. Then the schedule shows the different job names.

3. The 

[Load]

 area shows in which paper trays the selected media are loaded.

4. The 

output tray

 area shows which output locations the printer uses for the current data

stream.

5. The 

[Load]

 button allows to load media for the current job.

6. The 

message area

 of the dashboard shows the upcoming actions and other information.

7. The 

maintenance area

 of the dashboard shows symbols of maintenance actions you need to

perform immediately or soon.

Work with the schedule in transaction printing mode

118

Chapter 7 - Transaction printing

VarioPrint i-series MICR

Содержание VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды