Canon Saddle Finisher-T2, Руководство по обслуживанию

Страница: 79 / 262

Chapter 2
2-47
T-2-8
<First Sheet>
The finisher controller PCB moves the stapler according to the specified stapling position.
When the rear end of the first sheet passes the 1st delivery roller, the finisher controller PCB stops the stack delivery
motor (M102) and then rotates it in reverse. The stack delivery motor rotates the stack delivery roller and return roller
and delivers the paper to the processing tray. The paper in the processing tray is detected by the processing tray paper
sensor (PI108). When the paper is delivered to the processing tray, the swing motor (M106) starts and raises the
swing guide. When the swing guide home position sensor (PI105) detects the rising of the swing guide, the swing
guide motor stops and holds the swing guide at the raised position.
After the processing tray paper sensor detects the paper, the aligning motor (M103/M104) starts and aligns the paper.
Stapler
alignment
interference
sensor PI116 J720-3 Staple prohibited area
detection -
Staple home
position
sensor PI50 J720-5 Detects the home position
for the stapling operation. In the
stapler
Staple
edging
sensor PI51 J720-6 Detects the staple top
position. In the
stapler
Staple
sensor PI52 J720-7 Detects presence or
absence of staples in the
cartridge. In the
stapler
Function Motor Symbol Remarks
Moves the stapler. Stapler shift motor M105 -
Performs
stapling operation. Staple motor M111 -
Sensor Symbol Connector Function Remark
s