Canon ReallS SX80, Руководство пользователя

Страница: 30 / 148

30
Steps for Setting Up the Projector and Projecting an Image
Performing the Auto Setup ( P45 )
Connecting the Projector to Equipment ( P34 )
Turning on the Power ( P42 )
Selecting an Input Signal ( P47 )
Adjusting the Image ( P49 )
Do the following adjustments.
• Setting the Display Resolution of the Computer (
P49 )
• Adjusting misaligned computer images or flickering of
the screen using the Auto PC ( P50 )
• Adjusting the Image Size ( P51 )
• Adjusting the Focus ( P52 )
• Adjusting keystone Distortion ( P53 )
Making Fine Adjustments
• Selecting an Aspect Ratio of Projected Image (Screen
aspect) and a Screen Mode (Aspect) ( P55 , P58 )
• Selecting an Image Mode ( P60 )
Selecting Equipment From Which
to Project an Image ( P34 )
Do you want to project an image
from a notebook computer?
Image projected properly?
Image projected properly?
No
No
For a notebook computer, turn on
the monitor output (
P44 ) and then
go to Auto Setup.
Projection is complete.
Yes
No
Yes
Projection is complete.
Yes