Canon PowerShot SX420 IS, Руководство пользователя

Страница: 127 / 149

127
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
4
P Mode
9
Appendix
Index
No AF frames are displayed and the camera does not focus when the
shutter button is pressed halfway.
● To have AF frames displayed and the camera focus correctly, try composing the
shot with higher-contrast subject areas centered before you press the shutter
button halfway. Otherwise, try pressing the shutter button halfway repeatedly.
Subjects in shots look too dark.
● Raise the flash and set the flash mode to [ ] (
=
58).
● Adjust brightness by using exposure compensation (
=
50).
● Adjust contrast by using i-Contrast (
=
51,
=
75).
● Use spot metering (
=
50).
Subjects look too bright, highlights are washed-out.
● Lower the flash and set the flash mode to [ ] (
=
28).
● Adjust brightness by using exposure compensation (
=
50).
● Use spot metering (
=
50).
● Reduce the lighting on subjects.
Shots look too dark despite the flash firing (
=
30).
● Shoot within flash range (
=
141).
● Increase the ISO speed (
=
51).
Subjects in flash shots look too bright, highlights are washed-out.
● Shoot within flash range (
=
141).
● Lower the flash and set the flash mode to [ ] (
=
28).
White spots appear in flash shots.
● This is caused by light from the flash reflecting off dust or airborne particles.
Shots look grainy.
● Lower the ISO speed (
=
51).
Subjects are affected by red-eye.
● Set [Red-Eye Lamp] to [On] (
=
40). Note that while the red-eye reduction lamp
(
=
4) is lit (for about one second), it is not possible to shoot, because the
lamp is counteracting red-eye. For best results, have subjects look at the red-eye
reduction lamp. Also try increasing the lighting in indoor scenes and shooting at
closer range.
● Edit images using red-eye correction (
=
76).
Shooting
Cannot shoot.
● In Playback mode ( = 61), press the shutter button halfway ( = 23).
Strange display on the screen under low light (
=
24).
Strange display on the screen when shooting.
● The following display problems are not recorded in still images but are recorded
in movies. Please take note of this.
- The screen may darken under bright light.
- The screen may flicker under fluorescent or LED lighting.
- Purplish banding may appear on the screen if you compose a shot that
includes a bright light source.
No date stamp is added to images.
● Configure the [Date Stamp ] ( = 35). Note that date stamps are not added
to images automatically, merely because you have configured the [Date/Time]
setting ( = 17).
● Date stamps are not added in shooting modes ( = 137) in which [Date Stamp ]
cannot be configured ( = 35).
[ ] flashes on the screen when the shutter button is pressed, and shooting
is not possible (
=
30).
[ ] is displayed when the shutter button is pressed halfway ( = 30).
● Set [IS Mode] to [Continuous] (
=
59).
● Raise the flash and set the flash mode to [ ] (
=
58).
● Increase the ISO speed (
=
51).
● Mount the camera on a tripod or take other measures to keep it still. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other means to secure
the camera (
=
59).
Shots are out of focus.
● Press the shutter button halfway to focus on subjects before pressing it all the
way down to shoot (
=
23).
● Make sure subjects are within focus range (
=
142).
● Set [AF-assist Beam] to [On] (
=
39).
● Confirm that unneeded functions such as macro are deactivated.
● Try shooting with Focus Lock (
=
55).