Canon PowerShot G7X Mark II, Руководство пользователя

Страница: 342 / 539

342
ç
Contents
● The following Windows settings are configured when you run the
utility in step 2.
- Turn on media streaming.
This will enable the camera to see (find) the computer to access
via Wi-Fi.
- Turn on network discovery.
This will enable the computer to see (find) the camera.
- Turn on ICMP (Internet Control Message Protocol).
This allows you to check the network connection status.
- Enable Universal Plug & Play (UPnP).
This will enable network devices to detect each other
automatically.
● Some security software may prevent you from completing the
settings as described here. Check the settings of your security
software.
Saving Images to a Connected Computer
Connect to your access point via Wi-Fi as follows.
Also refer to the access point user manual.
Confirming Access Point Compatibility
Confirm that the Wi-Fi router or base station conforms to the Wi-Fi
standards in “Camera” (
=
520).
Connection methods vary depending on whether the access point
supports Wi-Fi Protected Setup (WPS,
=
344) or not (
=
348).
For non-WPS access points, check the following information.
● Network name (SSID/ESSID)
The SSID or ESSID for the access point you use. Also called
the “access point name” or “network name”.