Canon PIXMA MP640, Руководство по обслуживанию, Страница: 11 / 57

2. LIST OF ERROR DISPLAY / TROUBLESHOOTING
Errors and warnings are displayed by the following ways:
1. Operator call errors are indicated by the Alarm LED lit in orange, and the error and its solution are displayed on the
LCD in text and by icon.
2. Messages during printing from a computer are displayed on the MP driver Status Monitor.
3. Error codes (the latest 10 error codes at the maximum) are printed in the "operator call/service call error record" area in
EEPROM information print
Buttons valid when an operator call error occurs:
1. ON button: To turn the machine off and on again.
2. OK button: To clear and recover from an error. In some operator call errors, the error will automatically be cleared
when the cause of the error is eliminated, and pressing the OK button may not be necessary.
3. Stop button: To cancel the job at error occurrence, and to clear the error.
2-1. Operator Call Errors (by Alarm LED Lit in Orange)
MP640 / MP648 TABLE OF CONTENTS
Error
Error
code
U
No.
Message on the LCD Solution
Parts that are likely to
be faulty
No paper in the
rear tray. [1000] --- Rear tray.
There is no paper. Load
paper and press [OK]. Confirm that the rear tray is selected
as the paper source. Set the paper in
the rear tray, and press the OK
button. - ASF unit
- Pressure roller unit
- PE sensor board unit
No CD / DVD
tray
*1
.
[1001] --- There is no CD-R tray.
Attach the tray and press
[OK]. Set the CD / DVD tray, and press the
OK button. - CD-R tray
- Carriage unit
No CD / DVD
*1
.
[1002] --- Printable disc is not set.
Correctly place a disc in
the CD-R tray and press
[OK]. Set a printable disk in the CD / DVD
tray, and insert the CD / DVD tray in
the proper position. Then, press the
OK button. - CD-R tray
- Carriage unit
No paper in the
cassette. [1003] --- Cassette.
There is no paper. Load
paper and press [OK]. Confirm that the cassette is selected
as the paper source. Set the paper in
the cassette, and press the OK button.
Note that the cassette is for plain
paper only. - Pick-up arm unit
- Pressure roller unit
- Cassette unit
Paper jam. [1300] --- The paper is jammed.
Clear the paper and press
[OK]. Remove the jammed paper and press
the OK button. - Pick-up arm unit
- ASF unit
- Pressure roller unit
- Cassette unit
- Rear guide unit
Paper jam in the
rear guide. [1303] ---
Paper jam in the
under guide. [1304] ---
Ink may have run
out. [1600] U041 The following ink may
have run out. Replacing
the ink tank is
recommended.
Replace the applicable ink tank, or
press the OK button to clear the error
without ink tank replacement. When
the error is cleared by pressing the
OK button, ink may run out during
printing. - Spur unit
Ink tank not
installed. [1660] U043 The following ink tank
cannot be recognized.
(Applicable ink tank
icon)
Install the applicable ink tank(s)
properly, and confirm that the LED's
of all the ink tanks light red. - Ink tank
- Carriage unit
Print head not [1401] U051 Print head is not Install the print head properly. - Print head
8 / 54