manualshive.com logo in svg

Canon PIXMA MG5550 Series, Онлайн-руководство

Поделиться
Скачать
Canon PIXMA MG5550 Series Скачать руководство пользователя страница 40

Copying/Printing Stops Before It Is Completed

Check1

 Is the paper loaded?

Make sure that paper is loaded.

If the machine has run out of paper, load paper.

Check2

 Do the printing documents have lots of photographs or illustrations?

As printing large data such as photos or graphics takes time for the machine and the computer to process, the
machine may appear to have stopped operating.

In addition, when printing data that uses a large amount of ink continuously on plain paper, the machine may
pause temporarily. In either case, wait until the process is complete.

Note

• If you are printing a document with a large printing area or printing multiple copies of a document, printing

may pause to allow the ink to dry.

Check3

 Has the machine been printing continuously for a long period?

If the machine has been printing continuously for a long time, the print head or other parts around it may
overheat. The machine may stop printing at a line break for a period of time and then resume printing.

In this case, wait for a while without operation. If the printing still does not resume, interrupt your print session at
a convenient time and turn the machine off for at least 15 minutes.

Caution

• The print head and the surrounding area can become extremely hot inside the machine. Never touch the

print head or nearby components.

40

Содержание PIXMA MG5550 Series

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды