manualshive.com logo in svg

Canon PIXMA MG5550 Series, Онлайн-руководство

Поделиться
Скачать
Canon PIXMA MG5550 Series Скачать руководство пользователя страница 17

Cannot Detect the Machine during Wireless LAN Setup: Check 1

Are the machine and network device (router, access point, etc.) turned on?

Make sure that the machine is turned on.

Confirming that the Power Is On

Make sure that the network device (router, access point, etc.) is turned on.

If the machine or the network device is turned off:

Turn on the machine or the network device.

After turning on the machine or the network device, it may take some time until ready for use. After a while
just turning on the machine or the network device, click 

Redetect

 on the 

Check Printer Settings

 screen.

When the machine is detected, follow the instructions on the screen to continue to set up the network
communication.

If the machine and the network device are turned on:

If the machine and the network device are turned on or if the machine could not be detected after clicking

Redetect

, go to check 2.

Cannot Detect the Machine during Wireless LAN Setup: Check 2

17

Содержание PIXMA MG5550 Series

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды