(6/23)
3. ERROR DISPLAY
Errors are displayed by the LEDs, and ink low warnings are displayed by the Status Monitor.
3-1. Operator Call Error (Alarm LED Blinking in Orange)
Alarm LED
blinking
Error Corrective
action
2 times
No paper
Set paper, and press the Resume/Cancel button
to feed the paper.
3 times
Paper jam
Remove the jammed paper, and press the
Resume/Cancel button.
4 times
No ink
Replace the ink cartridge(s), or press the
Resume/Cancel button to continue printing
without replacing the ink cartridge(s).
5 times
The ink cartridges are not properly
installed, or a non-supported ink cartridge
is installed (the ink cartridge EEPROM
data is abnormal).
Install the ink cartridges properly.
Or, confirm that the supported ink cartridges are
installed.
7 times
Ink cartridge not installed
Install the ink cartridge(s), and close the access
cover.
8 times
Waste ink absorber full or platen waste ink
absorber full warning (approx. 95% of the
maximum capacity)
Pressing the Resume/Cancel button will exit the
error, and enable printing.
14 times
Non-supported ink cartridge installed
Replace the non-supported ink cartridge with the
supported one.
16 times
Used ink cartridge installed, or no ink
Pressing the Resume/Cancel button will exit the
error, and enable printing.
3-2. Service Call Error (Cyclic Blinking in Orange (Alarm LED) and Green (Power LED))
Cycles of blinking
in orange and
green
Error Corrective
Action
2 times
Carriage error
Replace the printer as it has failed.
3 times
LF error
Replace the printer as it has failed.
7 times
Waste ink absorber full or platen waste ink
absorber full
Replace the printer as it has failed.
8 times
Print head temperature rise error
Replace the printer as it has failed.
9 times
EEPROM error
Replace the printer as it has failed.
10 times
No ink cartridge detected excepting ink
cartridge replacement (during printing)
Replace the printer as it has failed.
