(9/23)
*
2
Shipment inspection pattern sample
EEPROM contents can be confirmed from the shipment inspection pattern printout (top of the shipment inspection
pattern). See APPENDIX 1, SHIPMENT INSPECTION PATTERN 1, for print sample.
*
3
EEPROM reset / Destination setting
a. Install the ink cartridge, and press the Power button to turn on the printer. (The Power LED lights in green.)
b. Connect the printer to the computer. Using the iP2200 / iP1600 / iP1200 service tool (QY9-0068), select “USB
PORT”. (See APPENDIX 2, iP2200 / iP1600 / iP1200 SERVICE TOOL.)
c. <Destination
setting>
Destination can be set by clicking “LOCK RELEASE,” then each model name in “SET DESTINATION.”
Confirm the model name by clicking “GET DEVICE ID” after setting change. (If incorrect, it can be changed before
turning the unit OFF/ON.)
<EEPROM
reset>
When ”EEPROM CLEAR” is checked, the EEPROM is reset after the shipment inspection pattern printing.
