Canon Paper Deck-V1, Руководство по обслуживанию

Страница: 76 / 90

Chapter 4
4-4
4.2 Adjustment
4.2.1 Basic Adjustment
4.2.1.1 Adjusting the
Registration
0009-4816
If the left/right registration (0 +/- 1.5 mm) must be
adjusted, perform the following:
1) Slide out the compartment, and adjust the position
of the latch plate [1] of the deck open solenoid by
turning the two screws [2]. (Use the scale [3] on the
latch plate as a guide)
F-4-3
4.2.1.2 Adjusting the Pressure
of the Deck Separation Roller
0009-4915
If pickup faults or double feeding occurs when the
deck is used as the source of paper, relocate the
pressure spring [2] of the deck separation roller [1]:
- if pickup faults occur, move the spring in the
direction of arrow A.
- if double-feeding occurs, move the spring in the
direction of arrow B.
F-4-4
4.2.1.3
Adjusting the Position
of the Roll
0009-4916
If the compartment cannot be opened/closed
smoothly, requiring adjustment of the roll located at
the front of the deck, perform the following:
1) Remove the front cover.
2) Slide out the compartment fully to the front of the
paper deck. Then, secure the roller support plate [3] in
place with 4 screws [4] so that the roller [1] is about 3
mm (A) from the floor. (At this time, use the index [5]
on the front side plate as a reference.)
F-4-5
[1] [3] [2]
A
B
about 3 mm
[4]
[5]
[2]
[1]
[3]