Canon Paper Deck-V1, Руководство по обслуживанию

Страница: 27 / 90

Chapter 2
2-7
in service mode COPIER>DISPLAY>ALARM1>BODY).
[1] Conditions Used to Move Up the Lifter
- the deck is joined with its host machine, i.e., the deck set signal (DSCK_MOUNT) is '1'.
- the deck (compartment) is closed, i.e., the deck open detection signal (DECK_OPEN_DTC) is '1'.
- the deck (compartment) is closed, i.e., the deck open detecting switch is 'on'.
- the deck lifter upper limit signal (UPPER_LIM) is '0' and, in addition, the deck lifter position detecting signal
(DECK_UP_DTC) is '0'.
- the deck lifer motor drive signal (DECK_LIFT_ON) is '0'.
- the deck lifter DOWN/UP signal (DECK_DW/UP) is '0'.
In the presence of these conditions, the lifter starts to move up.
[2] Conditions Used to Move Down the Lifter
- the deck (compartment) is open, i.e., the deck open detection signal (DECK_OPEN_DTC) is '0'.
- the deck lower limit detection signal (DECK_LOW_LIM) is '0' and, in addition, the deck lifter position detection
signal (DECK_UP_DTC) is '0'.
- the deck lifter motor drive signal (DECK_LIFT_ON) is '0'.
- the deck lifter DOWN/UP signal (DECK_DW/UP) is '1'.
In the presence of these conditions, the lifter starts to move down.