Canon NP6317, Руководство по обслуживанию

Страница: 149 / 248

CHAPTER 8 INSTALLATION
COPYRIGHT © 1999 CANON INC. CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
8-5
C. Checking the Operation
Work
Turn the door switch ON using the door
switch actuator.
Connect the power plug, and shift the
POWER switch to "ON".
Set the cassette size to suit the needs of the
user.
Put copy paper in the cassette, and set the
cassette in the copier.
Set the copy tray on the copier.
Open the copyboard cover, and remove the
protection seal and the cushions.
Record the reading of the copy counter.
After making any copies of the following,
the COPY START key goes red.
[1] making 7 continuous copies on A3
[2] making 9 continuous copies on A4
[3] making 5 single copies on A3
[4] making 5 single copies on A4
Check that the counter operates properly.
Step
1
2
3
4
5
6
7
8
9
Remarks
Check that the ADD PAPER and CAS-
SETTE OUT indicators go ON and the
WAIT indicator lights red.
See p. 8-8.
• Check that the ADD PAPER indicator goes
OFF.
• Press the keys, except the COPY START
key, on the control panel, and check that
each operation is correct.
Check the following:
• No abnormal sound is heard.
• The ADD TONER indicator starts to flash
when the Copy key on the control panel
turns red at the end of copying for any of
the following:
[1] making 7 continuous copies on A3
[2] making 9 continuous copies on A4
[3] making 5 single copies on A3
[4] making 5 single copies on A4
Check that the reading has increased by 2
from the reading recorded in step 7.